Mislim da nema veze sa WinXP Os i sp, bez obzira koji imas...to je do Catia
Nisi napisao da li imas apliciran SP na samu Catia, posto se ta greska otklanja sa service pack Catia SP4...
e sada, pronasao sam neko resenje koje moze da upali ali nisu postovali kometare da li radi...pa ako ti upali molim te postuj ovde...Resenje>
APAR status
Closed as duplicate of another APAR.
Error description
Catia V5 crashes with the 'command interrupted'
error if the CATStartupPath variable exceeds 210
characters.
Scenario:
Abstract -
Catia V5 crashes with the command interrupted
error if the CATStartupScript variable in
the 'CATIA_P3.V5R11.B11.txt' file is set to more
than 210 characters.
This happens only if the "Load Extended Language
Libraries" option in ON in the Tools => Options
panel.
Scenario -
1 - Open the CatiaV5 environment file
CATIA_P3.V5R11.B11.txt
2 - Set the CATStartupPath variable to a path that
is more than 210 characters.
3 - Launch Catia V5
4 - Click on Tools => Options => Parameters &
Measures
5 - Check the 'Load Extended Language Libraries'
option.
6 - Exit Catia V5 and launch again.
7 - Download the files TestItem.CATScript and
Part11.CATPart files attached to this PMR into a
local directory.
8 - In Catia V5 open the Part11.CATPart attached
to this PMR.
9 - Click on Tools=>Macro=>Macros - The macros
panel pops up.
10- Locate the TestItem.CATScript file and Click
Run.
Catia crashes with the command interrupted error.
.
Notes -
1 - If the CATStartupPath variable path is less than
210 characters everything works fine.
2 - Tests were done on Catia V5R10, Catia V5R11 SP02 and
Catia V5R13 SP03 and the results are exactly the
same.
MB GigaByte 7N400L * AMD 1800+ * HDD WD80GB * Kingston 3*256 MB DC* Asus ATI 9550GE *
WinXPSp2