[es] - Kako se instalira b43-fwcutter na slackware ?

mihojla

Član broj: 120688
Poruke: 188
free-123-236.mediaworksit.net.

Sajt: keramicar.sekon.net/akciz..

+34 Profil

^{08.12.2010. u 08:03 - pre 163 meseci}

Šta dobiješ na:
iwconfig
ifconfig -v wlan0 up
ls -l /lib/firmware/b43/
ls -l /lib/modules/*/kernel/drivers/net/wireless/b43/

_{[Ovu poruku je menjao mihojla dana 08.12.2010. u 14:12 GMT+1]}

Kap vode...

Odgovor na temu

Srđan Pavlović
Specijalna Edukacija i Rehabilitacija MNRO
Vojvodina, Bačka Palanka

Član broj: 139340
Poruke: 5571
77.46.145.*

Sajt: www.oligofrenolog.com

+382 Profil

Re: Kako se instalira b43-fwcutter na slackware ?

^{08.12.2010. u 10:19 - pre 163 meseci}

Instaliraj broadcom-wl paket.

Bleklistuj b43, lib80211 i ssd module u /etc/rc.conf-u, a dodaj lib80211_crypt_tkip i wl module pa vidi jel radi.

Ovako nekako, osim modula koje vec imas, dodaj i ovo:

MODULES=(!b43 !ssd !lib80211 lib80211_crypt_tkip wl)

Na Lenovo Netbook-u imam to broadcom njesra, i koristim taj STA driver koji radi najbolje:

http://www.broadcom.com/support/802.11/linux_sta.php

Build instrukcije ako ne nadjes gotov paket za svoj distro:

http://www.broadcom.com/docs/linux_sta/README.txt

_{[Ovu poruku je menjao Srđan Pavlović dana 08.12.2010. u 11:32 GMT+1]}

oligofrenolog

Odgovor na temu

toplim
Pera Furundzija

Član broj: 23551
Poruke: 806
87.116.158.*

+45 Profil

Re: Kako se instalira b43-fwcutter na slackware ?

^{09.12.2010. u 18:28 - pre 163 meseci}

nije bas naslov prikladan ali ovako sam zavrsio celu tu pricu: ne znam gde sam uputstvo nasao negde na ubuntu sajtu:

b43 - No Internet access
If you do not have any other means of Internet access on your computer, you will have to install b43-fwcutter and patch packages from the install media. After that you will need to setup firmware manually (without the firmware automatically downloading and being set up).

Setp 1.

b43-fwcutter is located on the Ubuntu install media under ../pool/main/b/b43-fwcutter/ and patch is located under ../pool/main/p/patch/ or both in the official repositories online.

Double click on the package to install or in a terminal (under the desktop menu Applications > Accessories > Terminal) navigate to the folder containing the package and issue the following command:

:/b43-fwcutter/$ sudo dpkg -i b43-fwcutter*
Step 2.

On a computer with Internet access, download the required firmware files from http://downloads.openwrt.org/sources/wl_apsta-3.130.20.0.o and http://mirror2.openwrt.org/sources/broadcom-wl-4.150.10.5.tar.bz2

Step 3.

Copy the downloaded files to your home folder and execute the following commands consecutively in a terminal to extract and install the firmware:

~$ tar xfvj broadcom-wl-4.150.10.5.tar.bz2
~$ sudo b43-fwcutter -w /lib/firmware wl_apsta-3.130.20.0.o
~$ sudo b43-fwcutter --unsupported -w /lib/firmware broadcom-wl-4.150.10.5/driver/wl_apsta_mimo.o
Step 4.

Under the desktop menu System > Administration > Hardware/Additional Drivers, the b43 drivers can be activated for use.

Note: A computer restart may be required before using the wifi card.

tako sam uspeo da pokrenem moju bcm4318 shklopociju. e posle updejta mora da se nesto ispravi, a moze i odmah, to je neki bug koji se javlja kada se koristi bcmxx:

sudo cp /etc/network/interfaces /etc/network/interfaces.bak

(backup-ujes interfaces ako zatreba slucajno)

gksudo gedit /etc/network/interfaces

i ostavis samo sledece:

auto lo
iface lo inet loopback

i iskren da budem mnogo mi se svideo ubuntu, mislim da je sad ozbiljniji sistem za desktop.

Odgovor na temu